Jim Carter's Old Chevy Trucks - Classic Chevy & GMC Truck Parts for all of your restoration needs! 1000's of parts in stocks now!

1947-1948 GMC Grille and Bumper

Used only the first 1 1/2 years into this body style, these GMC grilles stand out for their different shape and very heavy duty construction. Because of it’s weight this assembly, it sets on the frame and is given extra support by a pair of steel rods extended at an angle to the frame rail.  See photo.

The grille has three horizontal bars and uses a heavier gauge metal than the four bar grille introduced in 1949. This same unit is found during 1947 and 1948 in all 1/2 ton through 2 ton GMC trucks.

On these early 1/2, 3/4, and 1 ton trucks the splash apron from the grill to the bumper is even different. The front bumper is the most unusual. It is rounded much like an automobile and has three bumper bolts on each side.  They all have the small grill guard on the 1/2 and 3/4 ton.

Some suppliers of 1947 – Early 1955 bumpers and grilles state they are all the same.  But, they are not.  The 1947-1948 stands alone!

1947 1948 gmc grill 1

1947-1948 “3” Bar (above)

1947 1948 gmc grill

Note the 3 bumper bolts.  The center secures the front splash apron and securing braces.  The other two are used by the dealers to attach GMC accessory larger grille guards to the bumper.

1947 1948 gmc grill 2

1947-1948 “3” Bar (above)

1947 1948 gmc grill 3

1947-1948 Angle Grille Support (above)

1947 1948 gmc grill 4

1949-1955 “4” Bar (above)

1947 1948 gmc grill 4

Tags: , , , , ,

Comments are closed.