Jim Carter's Old Chevy Trucks - Classic Chevy & GMC Truck Parts for all of your restoration needs! 1000's of parts in stocks now!

1936 Chevy Half Ton

Owner: Pat O’Brien

 

 

 


This rare little ½ ton survived its 75 years mostly because it stayed with one family; it probably never ventured beyond the city limits, and was used mostly by a mechanic that lived in an area of dry air that discouraged metal rust. For the trucks first two years, it was driven by Virginia Swaim to high school each day in Prescott, Arizona.  After graduation her father used it as a shop truck in his auto repair business until he retired. Then, Virginia kept it mostly stored in a backyard garage until she passed away in 2002.

The new owner and restorer is Pat O’Brien also of Prescott, Arizona. He discovered it in the same closed garage where it had spent all of its later years. Virginia sold it to Pat several years after he discovered it by accident as he drove by the garage door that was open for a few minutes. Maybe this second ownership was meant to be! Pat was even given the pickups entire history in receipts from the day it was purchased. A box of so many receipts; from tires, gasoline, batteries, radiator hoses, and any other little repairs that needed during so many years.

Of course after all those years as a shop truck and many more sitting in the daughters garage, it was in need of so much more than a surface cleanup. Pat was ready for this challenge. His goal was to have his 1936 look bone stock on the outside with a change to most of the running gears that only the more knowledgeable truck person would recognize. Keeping an inline six cylinder was a must! He added a 292, the larger of the 1963 through 1972 design. The 4 speed was replaced with a Chevy car full synchronized floor shift 4 speed from the 1960’s. This floor shift system was almost a natural for the 1936 pickup.

The differential rear end was a great find. Removed from a 4 x 4 S-10 pickup, it matches the original 6 bolt wheel pattern and the distance between the rear wheels is just right for this 1936 ½ ton. Pat only moved the axle saddles slightly to the side and the original 1 ¾  wide rear leaf springs connected perfectly!

Keeping the 1936 front axle was important. He wanted it to keep the non-lowered original appearance. The front end difference is the hidden 6 bolt disc brake system fitted to his 1936 axle. Yes, the original 1936 lever action shock absorbers were rebuilt. They really are an excellent shock – just expensive!

The real creation was keeping the new dual chambered master cylinder under the floor between the original clutch and brake pedals.  Most people give up here on 1936-46 brake modifications and attach swing pedals to the firewall. Not Pat! He did it like the 1936 design. A bracket to support the pedals was attached to the transmission case much like GM did it. The opposite bracket on the original frame rail could then be utilized with the pedal shaft as from the factory.  Even the hand brake lever is attached to the newer 4 speed transmission like it was in 1936.  It comes through the floor in the correct position.

The 6 hole wire wheels are another eye catcher. To keep it like GM made it, Pat found these new US handmade wires to look original. Not cheap! They really help it keep its 1936 look and hold the radial tires well at any speed.

Pat O’Brien has created a total package that is one of a kind. We call it his little original speed machine!  No, we didn’t say inexpensive.  People are drawn to it at car shows or just moving in traffic. Virginia Swaim and her father would be proud!!

To contact Pat, email at: professorpat@hotmail.com

Tags: , , , ,

Comments are closed.