On an early Monday morning a customer, Mike Riley of Kansas City stopped by our shop to obtain some older Chevy truck parts needed during the past weekend. As I followed him to his mid-1980’s Chevrolet pickup he brought my attention to his new white paint job. He read about a home garage procedure on the internet and decided to try it.
He certainly was proud of how nice the paint looked. The project began with the usual fine sanding, taping trim, and covering windows. Next came the surprise that has generated this article. Mike bought 2 ½ quarts of industrial grade Rustoleum paint from a local hardware store. He also purchase 2 ½ quarts of Acetone to be used as the thinner.
Spraying the 1 to 1 mixture with his small home compressor was adequate. If the small compressor needed to occasionally build up pressure, no problem. It takes 20 minutes for the paint to dry to the touch, so it easily blends together. One coat does it all!
I was amazed at how nice it looked in our driveway that morning. Mike said the rules were to not polish the drying paint for 60 days. He had just polished the two month old paint on the nose of the hood that morning and I must admit it had a great smooth shine.
This procedure is probably not for the show truck but for the fun daily driver it may be just the way to go for the “do- it yourself” restorer. Mike says the industrial Rustoleum colors are limited so you must pick a more common choice when deciding.
Another important tip while using this painting method; Mike didn’t want to get paint overspray throughout his garage so he did the procedure outside in his driveway. A garden hose used by a friend kept the concrete wet during the spraying. This helped eliminate dust in the painted surface but equally important stopped overspray from settling on his driveway.