Jim Carter's Old Chevy Trucks - Classic Chevy & GMC Truck Parts for all of your restoration needs! 1000's of parts in stocks now!

1934-1946 Door Handles

The two series of exterior door handles on GM trucks between 1934-46 are certainly different yet they share a few similar features of interest.

One characteristic which seems strange today is that the handles lock the right doors only, not on the left. This occurs on GM trucks from the early 1920’s to about 1959. At this time, we have no reason for this feature. Maybe it kept the driver from standing too near traffic as he locked the door!

The 1934-38 handles are the same. The left has no cylinder key but the right handles are the locking style. Yes, the right and left handle will interchange but this is not the way it was done by GM. Switching handles would prevent the right door from being locked. There is no inside lock on the right!

With the introduction of the new body style in 1939, the handle design also changed, however the locking and non-locking handles remained in the same position. The big change started in 1942.

GM decided that rough roads plus freezing in the North caused too much lock breakage. The die cast lock parts inside the handle were too easy to break. During that year, the lock was moved down into the door skin. Both right and left handles became the same non locking design. The following photos show this big change in door locking on Chevrolet and GMC trucks.

Door Handle Trivia

The locking key cylinder used between 1934 to 1941 is the same despite visual changes in the handle body. Of course, if the truck is right hand drive, all is reversed!

1934-1938 Right

1934-1938 Right Door Handle

1939-1941 Right Door Handle

1939-1941 Right Door Handle

1939-1946 Left and 1942-1946 Right

1939-1946 Left and 1942-1946 Right Door Handle

1942-1946 Right

1942-1946 Right Door Handle (lock in door skin)

Buy Parts for 1934 to 1946 Trucks

 

Tags: , , , , ,

Comments are closed.