Jim Carter's Old Chevy Trucks - Classic Chevy & GMC Truck Parts for all of your restoration needs! 1000's of parts in stocks now!

Posts Tagged ‘tail gate’

1969-1972 Blazer Tailgate

Thursday, February 11th, 2010


Are you on a hunt for a new 1969-1972 Blazer tailgate? It may not be as difficult as you think. GM saved much money by using a 1967-1972 Chevrolet Fleetside tailgate!

1969-1972 blazer tailgate

The one difference is a narrow strip of stamped sheet metal attached to the top edge. Most used Blazer tailgates, whatever their lower condition, still have this strip.

This metal strip is necessary for a good seal when the upper lift gate is lowered with its rubber strip. The tailgate strip is held in place with seven sheet metal screws.

On at least the 1971-1972 Blazer, the strip is also held in place by a long strip of double sided tape (like used to hold the decorative side trim in place). By removing the screws, cleaning rust and old paint, it can be attached to the new tailgate. Presto! You have a new Blazer tailgate.

1969-1972 blazer tailgate

Tailgate Trim

Thursday, February 11th, 2010

It was during these years that General Motors began offering more style to their pickup truck line. Though most still considered a truck as a work vehicle, a growing segment of pickup buyers were being strongly influenced by trim and accessories that even rivaled many automobiles.

For the first time on GM fleetside pickups, decorative trim became available on the tailgate of their middle and upper level models. Even on the basic gate that had no trim, the stamped letters were given a contrasting color. During all of 1967-1972, the middle and more deluxe series gates carried three upper strips making one line running the width of the gate. These three strips were the only tailgate trim offered for 1967-1968. During 1969-1972, an additional horizontal strip (66 3/4′ long) was attached to the lower gate edge but only on the middle series fleetsides.

It was on the top of the line 1969-1972 pickup that Chevrolet went all out in tailgate appearance. On the 1969-70 CST and 1971-1972 Cheyenne, the lower trim strip was replaced with a very attractive wood grained horizontal band at the center. Though it covered the basic Chevrolet and GMC stamped gate letters, the band carried its own chrome die cast letters over the wood (vinyl) decal.

The following photos show both the three styles of trim on the 1967-1972 fleetsides. Note the lower narrow strip is not placed on the gate with the wood band. Tail light rings or bezels are designed to harmonize with the tailgate trim. The 1967-1968 CST light trim is different than the later design.

tailgate trim 1

1969-1972 Middle Series (above)

tailgate trim 2

1969-1972 Cheyenne (above)

tailgate trim 3

1967-1972 Chevrolet (above)

tailgate trim 4

1967-1968 Chevrolet CST (above)

1967 1972 GMC Standard Tailgate

Thursday, February 11th, 2010

1967 1972 gmc standard tailgate 1

To make the base fleetside tailgate just a little different from Chevrolet, GMC kept their letters body color and surrounded them in a contrasting color. On Chevrolet just the letters have the different color.

1967 1972 gmc standard tailgate 2

1967-1972 GMC (above)

1967 1972 gmc standard tailgate 3

1967-1972 Chevrolet (above)