Yes! The Rumor is True! Jim Carter Truck Parts is beginning our 46th Year!
Few if any have reached this milestone.
Jim Carter here, we are just as active in GM trucks as ever!
Click on a year below. See what a near 1/2 century can do for you!
Yes! The Rumor is True! Jim Carter Truck Parts is beginning our 46th Year!
Few if any have reached this milestone.
Jim Carter here, we are just as active in GM trucks as ever!
Click on a year below. See what a near 1/2 century can do for you!
THIS IS US! JIM CARTER TRUCK PARTS AT 45 YEARS
Thank you, thank you, for so many great customers like you that have helped our company reach
our 45th Anniversary. We are so proud to have reached this milestone. This is Jim Carter, I am
still very active as when I started restoring my first pickup, a 1950 Chevy 1/2 ton and needed parts! It now
sits in our Lobby!
Just a Few Extras:
- 17 employees with 130 combined year's expertice.
- Over one million parts in two buildings plus our very own nearby wood shop.
- Partisipated in numerous Swap Meets accross the country over the years.
- House so many more "USED" GM parts than any of our competitors.
- We supply parts to over 20 active nationwide Dealers and 2 in Canada.
- Helped with founding of All American Truck Club of New Zealand.
If you use a recently manufactured 216 water pump and combine it with the optional larger OEM radiator fan, a slight modification is necessary. The fan rivets will not clear the edge of the pulley hub. You must cut four notches in the hub for rivet clearance. Water pumps in the last five years appear to lack these notches.
Note: These larger fans, 18" long, were optional on smaller trucks and always came on the 1 1/2 ton's. It is the 15" fan that will usually be on small trucks and passenger cars.
Comments courtesy of: Bob Adler, Stephentown, NY. bobadler@nycap.rr.com
Notice the four notches cut on the outer rim of the hub. (above)
