6 volt

Our special truck this month is a 1948 Chevrolet Deluxe ½ Ton owned and 95% restored by John Young of Alameda, California. Almost all of the restoration was done in his 2 car home attached garage. This became a 4 year project out of sight of the neighborhood while the two family cars set outside! When using the word “restoration”...

There comes a time with some 6 volt vehicles that an emergency jump start is necessary. Maybe the battery has been drained due to a light or ignition switch being left on. Or maybe it was stored over a winter without the battery trickle charger being attached. Whatever, the reason, you feel helpless without another readily available 6 volt battery...

Six volt horn without a factory relay doesn’t sound? If you use the original 6 volt system, you “cannot” use the gray plastic incased brush and contact that also slips into the steering wheel hub on the 1947-52 First series Chevrolet/GMC Trucks. It is continually advertised for the 6 or 12 volt system. This is made only for the 12...

Two major changes occurred in 6 volt General Motors sealed beam bulbs (are actually not sealed beams) since they were first installed on vehicle assembly lines in 1940. The perfectionist restoring his truck to exact original specifications must have the correct headlights for his year. In very competitive judging, it’s these details that can make a difference. No doubt, replacement...

One of the more common reasons for slow engine turnover using an original six volt system is under size battery cables. Most of today's auto parts stores only stock the smaller diameter 12 volt design. Unknowing owners mistakenly replace their original worn cables with shinny new ones that are as much as half the diameter as needed. Two ground cables...