1949

Be careful in purchasing used Advance Design rear bumper braces! Even the seller may not know there are two different shapes. When installed incorrectly, the rear bumper will not be in the correct position. The more common rear braces are on the half ton pickup. They are designed to lower the long horizontal bumper so the tailgate can swing down...

How many truck owners do you know that have owned their vintage GM pickup almost 40 years! Steve and Patty Briand of Woburn, Massachusetts have been the owners of a vintage GMC since 1978 and it has become part of their family. HISTORY This 1949 GMC ½ ton long bed was bought new by the owner of a large chicken...

This special Advance Design pickup has come a long way from its early life on a Mid-Missouri farm. Owned and restored by Dale Jacobs of Dallas, Texas, this 1949 GMC ¾ ton has been down to the frame and came out just a little nicer than new. It’s the old story. It looked very nice and ran just as well...

The full rear quarter panels for the 1947-55 Chevy/GMC Suburban were made all the same at the metal stamping manufacturer.  To save money these panels were not made different if the Suburban was to have the double doors or the tailgate style opening in the rear. Thus, when the Suburban was provided with a lift and tailgate combination the 4...

One of Roy Asbahr's most special and unique vehicles is a just completed 1949 Chevrolet Suburban. After a 1 1/2 year restoration, it looks showroom new. Roy is a perfectionist in vehicle restoration and this is one of his best yet! The body and paint work was performed by Larry Swiggart.

I am Udi Cain, a war veteran from Israel. I love the USA and feel that Israel and USA are like one.

About 10 years after the introduction of GMC's new inline six cylinder engine in 1939, General Motors issued a 'Product Service Bulletin' in regards to a recommended improvement on the 228, 248, and 270. It appears the manufacturer discovered a weakness that shortened the life of the engine timing gears. This recommendation was made for enlarging the oil supply hole...

  During the Advance Design years no less than four different Chevrolet hood side emblems were used on 1/2 tons. Each of their two mounting pins are in the same place so the punched hood holes were unchanged during these years. All were chromed die cast even during the 1952-1953 Korean war chrome shortage. The following pictures show the correct...

What a traffic stopping combination! When this pair hits the road, even the non-truck enthusiasts take note. The proud owners are Bill and Ken Wedelaar in Midland Park, New Jersey. Bill and Ken have a local auto electric shop and the restoration of these trucks has been their hobby when time became available.

In the search for unusual trucks to place in our monthly feature, we came to a stop when we found this 1949 Chevrolet ½ ton. Though not restored original, it looks on the outside much like what would have been seen on the road in the early 1950’s.

The attached photos are of my 1949 Chevrolet Thrift Master Panel Delivery Truck. It was restored/ modified about twelve years ago but still looks pretty darn good thanks to the quality parts that Jim Carter supplies. This truck sits on a Chevelle front clip and differential.