1955

A very unique year for General Motors trucks. This was a split year! Two different body styles were displayed at different times at the dealerships. They are referred to as the 1955 First and 1955 Second Series. Why did this happen? Many have said: It is easy, Follow the Money! With limited changes in Chevrolet cars since 1949, it was...

About 5 years ago Steve and Cynthia Brouker of Lee, Massachusetts got an idea they wanted an old Chevy truck. Just one of many that have made early pickups about the most popular vehicle now collected and restored in the U.S.A. As most current pickup owners, the Broukers did not require a trailer queen for shows but rather a very...

They don’t get much rarer than these! In our over 200 Feature Truck of the Month Series since the year 2000, we have never even found one of these Carriers to use as an example.  In their three year production, mid-1955 to mid-1958, less than 1000 were sold through the many GMC dealers in the U.S. The limited survival rate...

About 15 years ago, Jim Carter Truck Parts, decided to reproduce the “real” GM step plates used in the years of 1947-55.  Though there were hundreds of step plate designs available during the early years, but only one is pure. The 1947-55 Chevrolet/GMC Running Board Safety Treads and was made available by the GM dealers. No lettering exists so they...

The world famous Chevrolet Cameo and GMC Suburban Carrier are well known by most early truck enthusiasts. They were created due to US citizens having more disposable income after World War II. Demand for houses, appliances, and vehicles were at times more than some factories could produce in a timely manner. In regards to vehicles, General Motors realized that options...

The full rear quarter panels for the 1947-55 Chevy/GMC Suburban were made all the same at the metal stamping manufacturer.  To save money these panels were not made different if the Suburban was to have the double doors or the tailgate style opening in the rear. Thus, when the Suburban was provided with a lift and tailgate combination the 4...

Attached are some pictures of the correct 1947-1955 GM panel truck seats. The right side was a factory option. This would be special ordered if the owner was planning on two passengers. Though they have been recovered with cloth instead of factory “leatherette”, they are correct in all other ways. What is interesting is how GM made the optional right...

What an ingenious way to keep a tail light in view! General Motors realized that with the tail gate in the lowered position the center tail light still had to be seen by the following traffic. At times the gate will stay lowered when longer freight is carried. Therefore, the 5” round light is attached to a swing bracket. This...

My 1955 GMC 100 was locally purchased in 1995 immediately after buying the '62 Airstream which resided for decades in a Minnesota field. As these trucks were designed, developed, and built to be work trucks, this one would continue to be so. A few months were spent designing the Jimmy so that it could be a strong, safe, and reliable...

An Inner-Line oil filter from Long Island, New York!  Rarely seen today but a popular early aftermarket option.  It secures to the engine block after removing the oil distribution cover.  No oil lines.  No moving the horn forward to make room for the intake manifold mounted oil canister.

What a unique invention. When you have a 1947 through 1959 single rear wheel 3/4 or 1 ton GM truck and need more pulling power, this is the answer. American ingenuity at its best! This new steel center hub extension includes eight long bolts to reach the original wheel studs. This holds the factory wheel in place and then provides...

It is very important where to drill the hole for the new radio antenna. The results of making a slight mistake will stay in your mind for many years to come! Radios during these 1947-54 Advance Design years were never installed at the factory. This was done by the authorized GM Dealer. In the box that contained the new radio...

During the recent Mid-West All Truck National's in Riverside, Missouri, a very special truck was on display. It had been brought to the show in an enclosed trailer from Virginia.The owner is George VanOrden of Fulks Run, Virginia and the vehicle is a 1955 Chevrolet Suburban with a NAPCO 4x4 system. His personal history, leading to this restored Suburban, is a story by itself. He spent his youth in this mountain section of Virginia only 10 miles from his current home. The interest in 4x4 trucks was early in life as these type trucks were regularly seen on the rough mountain roads in his county. It is not surprising George decided to restore a 4x4 after his retirement after 20 years in the U.S. Marines.

On the task force body style, 1955-1959, the GMC hoods began quite different than Chevrolet. Beginning in 1955 a large opening, 5.25" x 25", was used to hold a set of die cast GMC letters attached to a decorative grille. In 1957 this grille was removed in place of a perimeter ring. Why the less attractive ring was added is...

1955 Second Series-66 Chevy Truck Model I.D. We hope the following information on Axle, Transmission and Model identification will help many of you with your questions. Accuracy was a concern as we compiled this information. Because GM made so many scheduled as well as unscheduled changes, there is much discussion about these changes. The following is used by permission from...

To keep the 1947-1955 GM trucks base price low, their 6 volt cigarette lighter was a dealer accessory. The vehicle always came from the factory with a round blank out plug at the lower center of the dash.

With the introduction of the Advance Design Cab in 1947, a new dealer installed heater also became available. When used together this new body was referred to as The Cab That Breathes.

By the mid 1950's extra income in the U.S. was creating an increased demand for accessories on both cars and trucks. To take advantage of this, the Chevrolet Truck Division introduced one item as a first. It would not appear again on Chevrolet trucks until the mid 1970's.

This drawing is from the 1955-1959 Chevrolet Factory Assembly Manual. We have added our part number ( FL137 ) with an arrow to show the new floor shift foam collar that is now available at Jim Carter's Truck Parts. Click to enlarge

  By 1958 the Chevrolet V-8 fan shroud (not GMC) changed to the more traditional round design. During the V-8 beginning years in 1955-1957, it was little more than four pieces of custom sheet metal that helped pull air through the radiator core. The enclosed pictures are of an original fan shroud for a 1958-59 Chevrolet 283 V-8. It fits...

  Two totally different 12 volt starters were used on the 235 six cylinder Chevrolet light trucks during 1955-1959. They attach to different bellhousings and are not interchangeable. Hydromatic 3 Bolt Starter As shown in the photos, the Hydramatic transmission starter has three bolt holes for securing it to the bellhousing. A solenoid on top reacts to the drivers key...

  Chevrolet's linkage-type power steering is available as an RPO (Regular Production Option) on all models except Forward Control Chassis. New ease and fingertip steering control are provided because up to 80 percent of the steering work is done by hydraulic power. Maneuvering a heavily loaded truck in a small space becomes much easier, and straightaway highway travel is less...

  With the introduction of the new small block V-8's in 1955 Chevrolet trucks, modified sheet metal was created to help in cooling. The new truck design came standard with the proven 235 inline six cylinder but when an optional V-8 was added, cooling modifications were necessary. The short length V-8's cooling fan was too far from the radiator and...

  During the Advance Design Truck years, two air filters were available when an order was sent to the factory. The base air filter (no extra cost) was the oil-wetted design from earlier years. The owner was expected to place a thin layer of motor oil on the filter media. Dirt particles would be caught by the oil as it...

  With the introduction of the new Cameo in 1955, GM added their most deluxe features as standard equipment. This "Boulevard Pickup" was to stand out above all others. The wheel covers were not like that on the more standard pickup. To save tooling costs on this limited production model, GM used the wheel cover on the 1955 Chevrolet Belair...

  For those not requiring the original seat cushions on their 1955-59 Task Force truck, a roomy comfortable substitute is available. This unit is from a 1988 body style Chevrolet or GMC truck and is almost a bolt-in. The legs or side brackets on this newer seat comes attached to the cushions from a used truck and sets nicely by the...

  The differences between these two series of tail lights is an excellent example of lowering costs during production. To keep competitive, manufacturers will always consider making products of equivalent quality, but at lower prices. In 1960-1966, GM, as well as several aftermarket companies, used a redesigned tail light lens and eliminated the need for the earlier metal bezel. The...

  The Chevrolet and GMC left commercial taillight used during 1947-1953 is an excellent example of GM's conservative thinking towards trucks. The number one purpose for trucks was work! Therefore, if a part had been very successful on a prior body design, it just might be adapted later as a part in some new styling. Savings were in production costs...

  During the late-1950's GM car and truck manufacturers begin to install optional V-8 engines in their vehicles. To set the vehicles apart from their six cylinders, V-8 emblems were designed to attract outsiders. This GMC front fender V-8 emblem above was used during 1955 through 1957. The GMC letters were on both six and V-8 trucks. The pictured Hydramatic...

During the mid 1950's, V-8 engines began to gain popularity. Many became an option in full size cars and trucks that normally were provided with a six cylinder. When this occurred, most vehicles were given a body emblem advertising that the larger power plant was under the hood. GMC trucks were no exception. During the 1955-59 body style, two different...

  GMC bumper guards during these years were standard equipment and stamped from the same heavy gauge metal as the bumper (a different style and lighter gauge metal were dealer accessories on Chevrolet light trucks). A slight change in design was made at the end of the 1956 year. A more decorative pointed dimple was given the guards during 1957...

During the 1947-1955 years, no less than four different front hood emblems were used during regular production on the Chevrolet 3000 series trucks. Though all can be made to interchange during this 7 1/2 year series; for the perfectionist, there are only certain types for certain years. In 1947, the 1/2, 3/4, and 1 ton Chevrolet trucks began production by displaying a...

Some trivia from Jim Carter Truck Parts: On the Advanced Design Pickups and larger trucks, the battery was under the passenger side of the cab floor. To protect the battery from road debris (gravel, sand and ice) it was important that it be protected from this coming from the right front tire. Designers of the Chevrolet and GMC installed the...

  By 1954, the Korean War shortages were history. More trim and chrome plating began to show up in trucks and cars. The Chevrolet and GMC truck divisions both introduced a deluxe model for their pickups during mid-year 1954. Hopes were to appeal to the emerging buyers with more disposable income. The deluxe model of these two trucks shared most...

During the Advance Design years, 1947-55, Chevrolet and GMC each changed their grille designs twice. GMC made the change at the end of the second year and Chevrolet made the change at the end of the seventh year. Possibly to save tooling cost GMC, not Chevrolet, always used the same grille on all truck sizes in any one year. As...

Used only the first 1 1/2 years into this body style, these GMC grilles stand out for their different shape and very heavy duty construction. Because of it's weight of this assembly, it sets on the frame rails and is given extra support by a pair of 1 1/2 to 2 ton steel rods extended at an angle to the...

  Though the 1955-1959 GM doors are basically the same and will interchange, there is one noticeable difference. The inside metal door panel (covering window and door mechanisms) is held in place with smaller screws in 1955. It is assumed these smaller 10 x 24 screws were easier to break or strip when over tightening on the assembly line. By...

  Since their beginning in 1935, the Chevrolet Suburban was always the “people hauler” of General Motors commercial fleet of trucks. They were designed to carry more weight on rough roads than was the passenger car station wagon. While trucks were carrying freight from the time of their purchase, Suburban’s were reserved for passengers! It became an immediate success with...

No less than five speedometers were used in Chevrolet trucks during the Advance Design years, 1947-1955. If you want your truck just right, be sure you understand the differences. Restoring one you have on a shelf or purchased at a swap meet may not be proper for your year. The following will provide a description of differences. 1947 Red-Orange needle...

  During the 1947-1955 Advance Design years three different stock running boards on pickups and panel trucks were produced. Features such as width, number of ribs, thickness of metal, and length of under-braces are the same. When placed together, a difference in length is obvious. The longest unit was used on the 1 ton pickup and panel trucks with 134...

  One of the most unusual and rare options for the 1947-1955 1/2 tons are 'wide running boards'. The adjacent picture is from the 1949 Chevrolet Salesman's Data Book. The photos below are of used original boards recently found at an Oklahoma swap meet. They consist of 'short' running boards as used on all flatbed ¾ and 1 ton trucks...

All 1954-1955 Chevrolet/GMC trucks came from the factory with a blank-out plate to cover where the radio would be installed. As this accessory was dealer installed the plate could be removed (probably thrown away) and the new radio added.   This blank-out plate and its two special clips has become very rare in recent years. They are not being reproduced...

Push buttons were discontinued at the end of 1953 and did not reappear until 1967 Prior to 1959 radios used mechanical vibrator tubes. They would operate with either positive or negative ground. A low buzzing sound could always be heard from the tube area before the radio warmed up, once the sound began, the speaker made the buzzing difficult to...

  For the Perfectionist During the first half of the Advance Design years (1947-1955), GM offered a special panel truck as an option. This deluxe model was designed for a company wanting to give a more upscale appearance to their retail customers. During the era of one car families, the lady of the house looked more toward home deliveries for...

Since the introduction of GMC's first 1/2 ton pickup in 1936, there has always been a sharing of most sheet metal parts with Chevrolet trucks. This was done mostly for economic reasons. However, when possible, each of the two brands tried to make inexpensive changes to be different than the other. Some specific examples of this occurred during the Advance...

When observing un-restored GM trucks of the 1930-55 era, one will notice the majority of these vehicles were originally dark green. An explanation is simple. Green was their standard color! If you did not specify one of the other approximately eleven non-extra cost colors, your truck would be delivered green. The standard color of truck had been thought of as...

  During the 1955-1959 Chevrolet Task-Force truck years, the panel body style remained very popular. To help sales continue to grow, a two tone paint scheme was offered. This option was used for the business customer that planned on having their logo applied to the panel. A wide band on the sides and back was painted Bombay Ivory*. This two...

This month we feature one of the most unique eye catching Advance Design 1/2 tons in the country. On daily runs it is a real traffic stopper. At car shows it is surrounded by curious admirers and trophies seem to be a regular occurrence.

Here are some of the before and after pictures of my 1955 First Series Chevrolet Truck, complete August, 2006.

I have owned this truck since 1970, using it for fun and everyday use. Jim Carter's used parts have been a life saver for this old baby. All of the restoration has been only to maintain, repair or replace with original or original-reproduction parts.

Thanks again for the Cardinal Red paint for the wheels. Paint matched well. Thank you for your continued support and commitment to these trucks. This Cameo, before restoration, had only 32,000 documented miles. It has been quite a learning curve for me.

350 Engine 400 Transmission 9" Ford posi-track 78 Ford Mustang suspension. This truck has 1954 windows

I purchased my 1955 Chevy Truck in 1993 for $3,000.00 and just finished it this month. As you can see the frame has been modified with a 1973 4x4 Chevy Blazer running gears. The transmission is a Turbo 350 and the engine is a stock 350 Chevy.

My truck is a 1955 Chevrolet 3100 First Series Deluxe Cab. My wife used to ride in this truck as a girl in the late 1950’s. It belonged to her neighbor, the original owner. That neighbor drove it for years, and then sold it to another neighbor who used in on his farm for years. Then it was parked by the creek for about five years before I spotted it while on a Sunday drive in 1992.

This truck was purchased by my Grandfather in 1962 with 10,000 miles on it. It was used as a work truck by Grandfather until 1974 when it was given to my father. My father used it as a daily work truck until 1991 when he and I restored it.

Thank you for allowing me to share my truck with you. This is the only truck I have ever owned, and really the only kind of truck that ever held much interest for me. The first 1955 (second series) I ever saw was purchased by my best friend’s father. Not only did I think it beautiful, it was FAST!